Please read the user manual carefully before using it. We are not responsible for any intentional damage or improper use of the device.
For more information or questions regarding the use of products, please contact us through the website www.ave40.com.
- Dimensions: 92 x 62.5 x 30 mm;
- Material: zinc alloy;
- Battery type: two 18650/20700/21700 high-current batteries (the discharge current must be higher than 40 A);
- Weight: 258 g;
- Output mode: Kant (varvatt) / TC-SS316 / TC-Ni200 / TC-Ti / TCR;
- Output power: 7–220 W (in increments of 0.5 W);
- Max. output voltage: 7.5 V;
- Max. output current: 50 A;
- USB: 5 V / 1.5 A;
- RGB LED backlight mode: LED M1 / LED M2 / LED M3 / Blue M4 / Red M5 / Green M6 / Purple M7;
- Taste mode: Normal / Soft / Hard / Custom;
- Memory mode: M1 / M2 / M3;
- Resistance range in mode: 0.1-3.0 ohm;
- Resistance range in TC mode: 0.05 – 1.0 Ohm;
- Temperature range: 100-300ºС / 200-600ºF.
- Dimensions: 25 x 50 mm;
- Material: stainless steel + aluminum alloy;
- Capacity: 4 ml (ordinary glass tube) / 6 ml (glass bubble flask);
- Resistance range: TS-XX evaporator 0.18 ohm (60 – 110 W).
Press the bottom cover and insert two high-current 18650/20700/21700 batteries into the device case, turn the switch to the “On” position and the device will turn on, the “TESLACIGS” logo will appear on the screen.
Vape Starter Kit, Wholesale E Cig Starter Kits – AVE40
Before operating, please adjust the power to the range corresponding to the atomizer used.
Turn the switch to the “Off” position and the device will immediately turn off.
To hover, press and hold the main button. Release the main button to stop hovering.
Power lock / unlock
In variable mode, press and hold simultaneously the main button and the down button to lock / unlock the device power.
Lock / Unlock Temperature
In TC / TCR mode, press and hold simultaneously the main button and the down button to lock / unlock the temperature.
RGB LED backlight mode
When the device is turned on, press the main button and the Up button to switch to the RGB LED backlight mode. Then press the Up / Down buttons to switch between blinking or turning off the backlight.
Stylish LED RGB backlight (blue, red, green and purple) provides aesthetic pleasure.
Vape Wholesale Supply,Vape Wholesale China – AVE40
When the device is on, press the Up / Down button to adjust the power accordingly. Power is adjustable in increments of 0.5 watts.
Press and hold the Up or Down button to quickly adjust power.
Determination of the resistance of the spiral
When you connect a new atomizer or reconnect an existing atomizer, the device will prompt you for confirmation.
If you connected a new atomizer, then click the “Up” button. If you reconnect the same atomizer, then press the “Down” button.
To fill with liquid, unscrew the top cover counterclockwise, then pour the liquid directly into the slot.
- When using a new evaporator, fill the tank and let it stand 5 minutes before use so that the cotton is soaked with liquid.
- During tank filling the airflow must be completely closed.
- When the tank is full of liquid, do not leave the top cover open longer than when refilling.
Unscrew the clearomizer base counterclockwise, remove the old evaporator and replace it with a new one.
Air flow adjustment
Turn the ring to the bottom of the tank counterclockwise to reduce airflow and counterclockwise to increase it.
When the device is turned on, press the main button 3 times in a row to enter the menu mode. Then press the Down button to switch between settings.
Lock / Unlock Resistance, Taste Mode, Output Mode, Version Information, and Memory Mode. Press the main button to enter the submenu.
When entering the “Resistance Value” submenu, you can make an exact resistance setting by increasing or decreasing it by 0.05 Ohms.
Lock / Unlock Resistance
When entering the “Ω” submenu, switch between the icons to lock / unlock the spiral resistance.
These operations should be carried out at room temperature.
When entering the “Normal” submenu, the display shows: Normal / Soft / Hard / Custom.
In accordance with personal preferences, users can adjust the preheating of the spiral, setting the output power for the first 10 seconds of soaring. Custom mode is available only in option mode.
Each power adjustment histogram corresponds to 1 second, pressing the Up / Down button adjusts the current power, and pressing the main button proceeds to the next histogram.
After the installation is completed, the prompt “TEST”, “RESET” or “OK” will appear on the screen. You can test the settings first and, if they satisfy you, click the OK button to return to the main screen.
Best Vape Mods, Vape Box Mod, Vape Devices | Ave40
When entering the submenu, pressing the Down button allows you to switch between Kant / SS316 / Ni200 / Ti / TCR modes.
The temperature control mode screen displays the following information: voltage, output power, temperature, taste control, current mode, battery charge, memory mode M1-M3.
Thanks to the TCR function (temperature coefficient of resistance) with which the device is equipped, you can independently set the value of the helix material for the temperature control mode (SS316 / Ni200 / Ti).
The following is the TCR range for reference.
|Material||Min value tcr||Max TCR|
When entering a submenu with a battery icon, the screen displays the following: hardware version, software version, and product model.
When entering the “M” submenu, you can save the current parameter settings in the memory mode M1-M3: power / TCR / temperature / mode / taste mode.
Now It’s Available: Teslacigs XT 220W Kit
Hot Sale Recommendation:
WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html