Today we will talk about the well-known company GeekVape and its new brainchild – Aegis Mini Kit. This starter kit is the younger brother of GeekVape Aegis , which over the year gained an audience of over one hundred thousand people. The Aegis Mini Kit is compact in a rugged case with a built-in battery. Well, let’s go!
Information for information
This starter kit has as many as 17 different colors, as well as two versions of the configuration – the standard and TPD version (Tobacco Products Directive – a European directive prohibiting the volume of liquid in an electronic cigarette from above 2 ml). Sold as a separate mod and starter kit with a Cerberus atomizer. The mod is equipped with the modes varivatt, thermocontrol, bypass, TCR, VPC, has a built-in 1800 mAh battery, landing up to 28 mm and stealth format.
Electronic Cigarettes Wholesale,Vape Wholesale and Distribution – Ave40
there is a hologram in the bottom corner that protects it from a fake
– Mod Aegis Mini;
– A Cerberus tank with 5.5 ml expanded Bubble Glass and a pre-installed Super Mesh X2 evaporator with a resistance of 0.3 Ohms
– Spare evaporator Super Mesh X2 with a resistance of 0.3 Ohms, which is sealed in vacuum;
– Replacement glass for 4 ml;
– USB cable for charging and firmware;
– Instructions for use;
– Replaceable seals for mini-USB port;
– A set of o-rings and sealing rings for the tank.
Power: from 5 to 80 W
Supported resistance: from 0.05 to 3 Ohm
Modes: varivatt, Ni200, Ti, stainless steel, temperature coefficient, mechanical mode, variable power control mode.
Temperature limits: 100-315 degrees Celsius, 200-600 degrees Fahrenheit.
Cerberus tank overview
Now we estimate the atom Cerberus itself. Previously, we were already familiar with this tank when unpacking GeekVape Nova , where we stopped at its consideration in more detail.
Here we will quickly run. Drip-type 810th, sits quite tight, but has a non-standard look, there is a small chamfer at the junction with the top cap.
Top Vape Tanks, Vape Atomizer, Clearomizer Online | Ave40
At the same time, their favorite 810 drip types are installed without problems and the barrel of fun starts to look, for example, as shown in the figure below.
The top one is not as comfortable as the SMOK products, but this is not fatal – there are no threads here, the top cap comes with a snap in a half turn, which is also normal. Approximately the same implementation of refueling in Zeus X RTA . There is a silicone gasket for reliable sealing. The only thing that bothers is that it’s a flat refueling area, which, after filling up with liquid, will have to wipe off the excess zizhka with a napkin.
Height: 42.5 mm;
Landing diameter: 25 mm;
Volume: 2/4 / 5.5 ml depending on the glass.
The mine is very wide with a conical treatment. Extended glass looks stylish and is easily replaced.
The evaporator is wide and goes on a mesh, on the evaporator itself it is indicated that it is recommended to hover at 30-40 watts.
Taste quite good. The base sits tight and has airflow adjustment with a stopper. Bottom is not very well protruding pin, so it is not recommended to use the tank on mehmodov.
The connector on this mod is very wide with a giant landing. 510 pins are not very buried when you wind some drips or atomizers, so levitation is obtained a little.
However, the tank Cerberus sits flush. I also want to say about the thread on the 510-m connector, it is tight and the tanks are twisted with a little effort, this is good.
On this baby, you can probably wind up all up to 28 mm. Here’s what a 24mm drip looks like – Drop Dead RDA from the guys from HellVape.
And here is how the 25mm mm rip is the Warrior RDA .
With atomizers, too, everything looks valid. Here’s how with Serpent Elevate RTA from Wotofo. This tank is 24 mm on the seat and visible levitation.
Feedback from use
What can I add about this mod? It is perfect for fans of stealth devices, any MTL-tank will perfectly fit on it and you will get compactness and excellent taste in an almost unkillable shell. Why practically? We still do not recommend to drop this device on the screen, since you most likely will get a crack. He will continue to work, but the appearance will be spoiled.
The experience of using this mod is definitely positive. There are small flaws, such as the appearance tampered with a connector on small tanks, as well as a small amount of battery (Western sources say that instead of the stated 2200 modes, it has only 1800 mAh). But speaking in general, this is a worthy player in the market of electronic cigarettes, with a high-quality assembly and a rich bundle, which was once again taken care of by engineers from Gikveypa. If short-fry fries on varvatte, bypass seems that even faster. They didn’t bother with thermal control, as they are of no particular interest.
In general, such a class of wipes, with protection from moisture and dust, as well as from impacts, has a right to exist, since there is a whole army of fans following adventure and active recreation. At the end of 2018, we talked about an interesting mod – the Wismec Active vape column , which, although a little, found its admirers.
Vape Starter Kit, Wholesale E Cig Starter Kits – AVE40
GeekVape Aegis mini 80W can be safely called a good solution for lovers of compact solutions, while for the price-quality ratio you can safely put a rating of 5, since this device has all the necessary options offered by the manufacturer.
Cons and pros:
– poor screen protection with a universal “body armor”;
– small battery capacity;
– cover soft-touch mod, will require care, because dust literally sticks to it;
– there is no reset button for resetting the settings, if anything goes wrong.
– great design;
– readable screen;
– Rich equipment;
– moisture, dust and shock resistant casing;
– quality tank included;
– there is the possibility of fast charging on a 2-ampere cable (up to 80% per half hour)
– a variety of body colors;
– good build quality.
Now It’s Available: Geekvape Aegis Mini Kit
Hot Sale Recommendation:
WHOLESALE INQUIRY: https://www.ave40.com/wholesale-service.html