Afeng Mesh Pod Kit Snowwolf Review-18650 Electric Battery

The Snowwolf A-Feng Pod kit is really a new pod mod using a replaceable electric battery. All of them attribute sturdy color strategies with elegant models. Rather than a put-out logo design like they had in the Mfeng packages, the Afeng features a subtle wolf logo that’s slightly elevated from the surface of the product. Just enough to provide a nice tactile feel when you run your disposal across it.

And so the fascinating thing regarding the AFeng is the fact that, while using a 18650 electric battery, there’s no adaptable wattage, it’s all managed by the pods IFV nick. but I can guarantee that this clever control nick does a fantastic job of regulating the wattage to give you the ideal hit.

In the lower coil is surely an airflow engagement ring that you can use to modify the airflow for your preference.

To gain access to the satisfying slot on the side of the pod it is possible to eliminate the area board and rubber cover.

There’s also abundant battery venting ports for both the sides and the bottom of the unit. No longer having to watch for your pod device to charge, just chuck a brand new battery power in and you’re good to go! Plus its USB C chargeable, so when you don’t use an extra electric battery, you can cost the main one you currently have relatively rapidly.


Snowwolf Afeng Mod

Power Output: 16-22W
Input Voltage: 3.2-4.2V
Resistance Range: 0.3-1.5ohm
Charging Interface: Type C
Charging Current: 5V/1A

Snowwolf Afeng Pod

Capacity: 2ml/3ml
Material: PCTG
Vaping Style: MTL & DTL
Airflow Style: Bottom Air In
Airflow Adjustment Style: Bottom
Pre-installed Coil: Wicked Coil (0.6ohm)
Extra Coil: Wicked Coil (0.6ohm)
PG/VG Suggested: All


1 x A-Feng Mod
1 x Pod
1 x Wicked Coil
1 x Drip Tip Protection Cap
1 x USB Cable
1 x Mod User Manual
1 x Pod User Manual
1 x Pass Card
1 x Warranty Card
1 x Spare Parts

Now you can find it in our store.

Click here to see:   Snowwolf Afeng Mesh Pod Kit

Now you can get it from AVE40 which provides Quality Vape Products which is a trusted Vape Wholesale Supply by VapeShops Owners.

Wholesale Inquiry:

Geekvape Aegis boost Pod Mod Kit 40W-Multi-Function Kit

The GeekVape Aegis Boost Pod Kit is very light-weight, even when full of 3.7ml of e-liquid. But it’s also durable and well built. Flipping it rounded for a finger fire as well as its slightly unusual to keep, but nonetheless comfy.

The Pod

The container includes a dust particles cover that clicks on the best, safeguarding the mouthpiece.

The set only comes with the one Pod. its acquired replaceable coils along with a refill portion at the very top. It holds e-fluid, you are able to replace the coils and modify the airflow.


GeekVape Aegis Increase Airflow Manage

Just a little spinning wheel that changes 360 degrees and it also lets you fully adjust your airflow to your desired.

Fill port

Just over the spinning wheel is your fill-up port, guarded with a silicon bung which ideally you need fingernails to remove.

As soon as eliminated, the fill pit is large enough even for the big-tipped bottles.

GeekVape Aegis Increase Coil Installment

The Coils that are included with the Aegis Enhance are drive-suit coils, and they’re simple to set up on the lower pod. you might want to take advantage of the coil-removal tool that comes inside the package.


The .4Ω Mesh coil executes excellently for flavor, and vapor manufacturing. .6Ω coil is pretty much the same as the .4Ω coil – blooming’ excellent. The vapor manufacturing is nice, not just a massive cloud chucker, but a good cloud, however.

Life Of The Battery

That was enough battery lifespan to final me the daytime, with just a cheeky charge in the evening to final until bed.

Furthermore, the fully changeable airflow manage wheel get this top of its course, it also delivers the finest flavor for a DTL and MTL practical experience, with the added bonus the device is IP67 waterproof, dust particles-resistant and shockproof. An ideal starter kit, but has enough punch to become enjoyed by an experienced vaper also.


Size: 106.8 x 39.2 x 27.7mm
Material: Zinc-Alloy, Leather and Silicone
Battery Capacity: 1500mAh
Wattage Output: 5-40W
Output Voltage: 1.0-6.0V
Firing Speed: 0.08s
Coil Resistance: 0.6ohm
Charging: Micro USB port
Charging Current: 5V/1.5A
E-juice Capacity: 3.7ml
Filling Type: Easy top refill
Airflow: Easy Access Airflow Valve


1 x GeekVape Aegis Boost Pod Mod Kit
1 x GV Boost Coil(0.6Ω 15-25W)
(Pre-installed:GV Boost Coil 0.4Ω 25-33W,capacity 3.7ml)
1 x Drip tip
1 x Coil tool
1 x USB Cable
1 x User Manual

Now you can find it in our store.

Click here to see:  Geekvape Aegis boost Pod Mod Kit 40W

Now you can get it from AVE40 which provides Quality Vape Products which is a trusted Vape Wholesale Supply by VapeShops Owners.

Wholesale Inquiry:


Topside Lite 90W TC Box Mod Dovpo Preview-OLED screen

The Topside Lite is produced by Brian from your Vapor Chronicles YouTube station and produced by Dovpo.

The Topside Lite carries on using the top load tradition which includes a leading filling up squonk jar to make refilling a lot easier.

The production is adjustable and you could select from Varied Wattage, Temperatures manage (Ni, Ti, SS) and TCR consumer settings.

On the side of the mod will be the clear .96in OLED screen and the interface control keys.

The back of the mod is detachable and you can install the squonk accessory to utilize this being a squonk mod or a plain deal with to use as a typical mod. From what I can see you are doing get both rear addresses inside the set.


Material: Polycarbonate+ PCTG
Size: 97.5mm * 58.0mm * 28.2mm
Display: 0.96″ OLED Screen
Output Wattage: 5-90W
Temperature Range: 100-315°C/200-600°F
Input Voltage: 3.2V-4.2V
Output Voltage: 0.8V-8.5V
Resistance: 0.08ohm-3.50ohmb


1 x Dovpo Topside Lite mod
1 x Squonk battery cover
1 x Plain battery cover
1 x Battery adaptor sleeve
1 x Accessory pack
1 x USB Cable
2 x User Manual
1 x Warranty Card

New design, new squonk, you are going to love a newly TC container mod.

Now you can find it in our store.

Click here to see:   Dovpo Topside Lite 90W TC Box Mod

Now you can get it from AVE40 which provides Quality Vape Products which is a trusted Vape Wholesale Supply by VapeShops Owners.

Wholesale Inquiry:

Vaporesso Swag II 2 Vape Starter Kit Review-With 4ohm Single Coil

Vaporesso Swag II 2 Vape Starter Kit: By implementing a special created rubberized coating, it is now even less heavy and a lot more durable, having a hand believe that will give you next phase convenience.

The flavor and vapor quality set out from the kit both are good. The package comes with the GT2 coil as well as the GT CCELL. The GT2 is actually a .4ohm single coil that delivers a fairly balanced mixture of both flavor and cloud manufacturing.

The power versatility of the package is useful for the little size and solitary 18650 battery power. You receive approximately 80W from this, plus temperature control, TCR, and bypass function. They provide very good flavor and big clouds.






Now you can find it in our store.

Click here to see:  Vaporesso Swag II 2 Vape Starter Kit

Now you can get it from AVE40 which provides Quality Vape Products which is a trusted Vape Wholesale Supply by VapeShops Owners.

Wholesale Inquiry:

Innokin Zlide Tube Kit Review – Amazing Life Of The Battery

The Innokin Zlide Tube Kit is internet hosting a 3000mah battery, which is really cool, but exactly what does impress is the way light-weight the battery is minus the reservoir. Quite simply on the pocket.

It appears built with a 24mm diameter Zlide tank (certainly) which has a 4ml water capability. It’s “Designed for cost, simplicity of use, amazing life of the battery, and excellent vape top quality and flavor”

It doesn’t have variable energy settings, based on Innokin if you are using a Zlide coil which is under 1. Ohms it is going to a fireplace at 16W. Utilizing a Zlide coil over 1. Ohms will flame at 13W.

The Zlide Reservoir

The Zlide container appearance pretty. Instead of the window being fully subjected, the metal construction falls both sides in the tank. The window is additionally detachable, which is great, this means should you break the window, It can be restored, obviously. That may sound obvious, but it is not real for all tanks. In addition, it makes it easier to give the container a comprehensive clear.


The Zlide Tank gives variable airflow and though it doesn’t provide an ‘obvious’ Primary to Lung (DTL) airflow (larger opening), the airflow is pretty nice.

Guided Indication

Whilst vaping the LED Indicator will light up, with a color that represents the existing battery power cost.

•Environmentally friendly = 100% – 40Percent

•Blue = 40% – 10%

•Red = 10% – 1Percent

•Flashing Red-colored = Battery power is deceased and needs recharging.


The battery life is where issues get really remarkable, operated by way of a 3000mAh battery power, the set can provide approximately 1,200 x 2 2nd puffs in the maximum power production, using the .8 ohm coil at 16W. I’ve utilized the .8ohms for 10 days and also the 1.2ohm coil for 3 days and they’re both still going solid.

The Innokin Zlide Pipe package is a good starter kit for that vaper that wishes a simple but plentiful oral cavity to lung set. it gives you a lot of sleek vapor and flavor. And it has a massive battery power that will get any ex-smoker from the day.


Product Name: Zlide Tube
Battery: 3000mAh/3.7V
Capacity: 4ml (Zlide tank)
Wattage: Max. 16W
Resistance Range: 0.4-3.0Ω
Cut Off Time: 10sec
Tank Resistant: Z-Coil 1.2ohm (10-14W)/ 0.8Ω(15-18W)
Max. Output Current: 6.5A
Thread Type: 510
Charging Current: 5V/1A


1 x Innokin Zlide Tube Mod
1 x Innokin Zlide Tank (4ml Version)
1 x Innokin Zenith Z-Coil 1.2ohm Atomizer Head (Pre-installed)
1 x Innokin Zenith Z-Coil 0.8ohm Atomizer Head
1 x Replacement Glass
1 x Set of Spare Parts
1 x Micro USB Cable

Now you can find it in our store.

Click here to see:Innokin Zlide Tube Starter Kit 3000mAh

Now you can get it from AVE40 which provides Quality Vape Products which is a trusted Vape Wholesale Supply by VapeShops Owners.

Wholesale Inquiry:


The Vladdin Boqpod is Vladdin Global Ltd. and boqpod tech’s initially-ever co-brand name merchandise.

Present the Vladdin Boqpod Set! Boqpod includes a convenient and fully receptive car-triggered airflow move. And the special drip-evidence pod style allows for optimum use and preservation from the devices’ principal structure.

The pod system comes with a convenient and fully receptive auto-stimulated airflow switch. As well as the distinctive drip-evidence pod design and style enables ideal use and preservation of the devices’ main structure.


Dimensions: 46*10*46mm
Battery: 400mAh
Capacity: 1ml
Output Voltage: 3V
Resistance: 1.1ohm
Charging Time: 40 minutes
Atomizer Type: Microporous Ceramic


1 x Vladdin Boqpod Battery
2 x Vladdin Boqpod Pods
1 x Lanyard
1 x Metal Tag
1 x USB Charging Cable
1 x Warranty Card

The Vladdin boqpod will be the optimum product for any healthful lifestyle with design.

Now you can find it in our store.

Click here to see:   Vladdin Boqpod Vape Pod System Kit

Now you can get it from AVE40 which provides Quality Vape Products which is a trusted Vape Wholesale Supply by VapeShops Owners.

Wholesale Inquiry:

Vsticking VKsma Starter kit Review

VKsma was newly released by Vsticking lately! Vibrant look, Huge battery power capacity, Auto-filling up work, Exact temperatures manage functionality, Can handle Vsticking SMI RADA, and numerous protections utilized, it will bring you exceptional vaping trip!


Size: 79 x 47.5 x 18.6mm
Material: Zinc Alloy
Battery: 1400mAh
Capacity: 3.0 ml
Display: 0.69″ OLED
Adjustable Wattages:
Auto Modes:
0.3Ω Ni211: P1 (10-15W)/ P2 (20-25W)
1.0Ω SS316: P1 (5-6W)/ P2 (10-12W)
DIY Mode: 10-35J
Temperate Control Range: 180-260°C (356-500°F)
Input Voltage: 3.2V-4.2V
Output Voltage: 1.73V-3.5V
Charging Voltage and Current: Standard DC 5V/ 1A

Type of Atomizer:
SMA ADA (Auto Dripping Atomizer)
Size: 28.1*14mm
Materials: Brass + PP
Coil Material and resistance: 0.3Ω Ni211 Ni-Mn alloy coil; 1.0Ω Ss316
Support working modes: AUTO MODE + DIY MODE

SMI RADA (Rebuildable Auto Dripping Atomizer)
Size: 33.5*15.5mm
Materials: Stainless steel + PEI
TCR Setting: Ni211 = 0.00600, SS316=0.00088; Ti01=0.00350; Ni200=0.00680
Support Various TC coils only & the coil resistance range is 0.2-1.0ohm.
Support working mode: DIY MODE ONLY

Packing A

1 x VKsma Device
1 x SMA ADA (0.3Ω Ni211)
1 x 3ML E-liquid Tank
1 x Silicon cap of Eliquid tank
1 x Instruction Manual

Packing B

1 x VKsma Device
1 x SMA ADA (0.3Ω Ni211)
1 x 3ML E-liquid Tank
1 x Silicon cap of Eliquid tank
1 x Instruction Manual

Now you can find it in our store.

Click here to see:  Vsticking VKsma Auto Squonk TC Kit with Yihi Chip 1400mAh

Now you can get it from AVE40 which provides Quality Vape Products which is a trusted Vape Wholesale Supply by VapeShops Owners.

Wholesale Inquiry:


Hellvape fat Rabbit Sub Ohm Tank review

The Hellvape Fat Rabbit gives us an atomizer with little novelties. In the latest several weeks, the vape marketplace has endured an actual sub-ohm tsunami. Nerd Vape along with his Zeus, OFRF along with his NexMesh without forgetting the TFV16 and Valyrian 2. That’s a good program. In contrast to RTAs and RDAs, the vaper is forced to get new coils each time.

And the manufacturers often justify themselves by proclaiming that the fashion is at Mesh would be that the rebuildable in Mesh is not really yet created. Even when we can swing a Kylin M Vandy Vape inside their deal with to show that they are wrong.

Increase Airflow for Hellvape Body fat Rabbit

But unlike all of the atomizers which come out, the Hellvape Body fat Rabbit provides two novelties. The first is that it offers a double Air-flow, the first at the top as well as the 2nd in the bottom. We all do not often see this kind of setting. In other people’s atomizers, we now have several airflow cyclops down. So, it’s equally a positive and negative point.

Both Airflows are in Cyclops. When they had set an Airflow with openings, then we would have had a true polyvalent Airflow system. We could even do restrictive DL, but that’s difficult. By using these two airflows, the Fat Rabbit can become very airy or perhaps a little limited.

And this will be essential that Hellvape exams his items every once in a while, as it proposes two coils in Mesh with Hellvape Excess fat Rabbit. Classic, but he dares to tell us that this tank can be used for MTL. Both coils are respectively .15 ohm and .20 ohm. A person goes to say to Hellvape that no, we can’t do MTL with .20 ohm…

However, the atomizer has a good design. The style is really stunning, the capacity is 5 ml with a pyrex bubble and another pyrex for 2 ml. It’s pretty small and maybe I’m incorrect, he can do MTL. Since if the Hellvape Fat Rabbit is aery when I believe, the capability of 2 ml is ridiculous.

Compatibility with many coils

Hellvape has always provided us good products with all the Rabbit family members. The Dead Rabbit in RTA continues to be one of the best in terms of cloud chasing after. So, we could assume very good clouds with the Hellvape Excess fat Rabbit. And where I’m pleased with this atomizer is that it provides its coil in OCC, a regular designed by Kangtech.

Hellvape confirms that Excess fat Rabbit will continue to work with Smok’s TFV8 Baby Beast coils, Vaporesso’s GT, Geekvape’s Aero and many others. Since the Infant Beast is itself suitable for coils like Eleaf HW (for your Ello atomizer). And it’s a thing that I really appreciate. I have no issue with the atomizers, actually, that’s what I make use of the most (greetings to my TFV8 Infant crumbling on all sides).

But tend not to take vapers for cash cows by creating each new coil, specifically for a single atomizer. Produce atomizers weekly if you want, but keep the compatibility of coils! So, this can be a very good stage for the Body fat Rabbit plus it could get noticed clearly from your others.

Will be the purchase worth the cost?

In case you are an enthusiast of the Rabbit family members, then you would like to add it to your selection. Understanding that it is the first atomizer in the variety. Nevertheless, I actually do not believe this atomizer would match in my opinion, simply because despite just what the company claims, it is driven for clouds.

And also the facial area of the atomizer tells us the grandpa vape, it’s not his point. But the dual Airflow is interesting and the compatibility in the coils means that you can use it for a long time. If Hellvape experienced just place the Top Airflow, then he could have experienced an atomizer that would not have leaked. And then he could be used by vapers in the plethora of 30 to 50 watts. For this particular a single, it can start at 40 watts to shows all its power.


Brand: Hellvape
Diameter: 25mm (28mm of Widest Point)
Capacity: 5ml/2ml
Drip: 810 Widebore Drip
Connection: 510 connector
Coils Type: 0.2ohm Single Mesh Coil (H7-02)
0.15ohm Quad OCC Coil (H7-03)


1 x Fat Rabbit Sub Ohm Tank
1 x Quad OCC Coil 0.15 Ohm(H7-03)
1 x Single Mesh Coil 0.2 Ohm(H7-02)
1 x Hellvape Sticker
1 x Accessories Bag
1 x Spare Bubble Glass
1 x Instruction Manual

Now you can find it in our store.

Click here to see:  Hellvape Fat Rabbit Sub Ohm Tank

Now you can get it from AVE40 which provides Quality Vape Products which is a trusted Vape Wholesale Supply by VapeShops Owners.

Wholesale Inquiry:


Acrohm Fush Nano vape kit Test Review

The Acrohm Fush Nano Pod kit LED lights to protect the whole chassis and will be established in your desired color by simply shaking the device. It consists of bulletproof PC and it has these complete alternatives: dark green, sapphire light blue, pinkish purple and black, and silver. It is possible to change from clean to tighter drawing to acquire a various vape encounter, and the toggle button allows you to set the ability to 7 or 10 watts.

Inside the Fush Nano, there exists a 550mAh incorporated battery that may be charged by way of a secret micro USB port near the base. Also, safety measures consist of substantial-temperature protection, reduced voltage security, timeout safety, overload security, brief circuit security, and opposite security. To demand the 550mAh integrated battery, a stylish charging graphical user interface is a part of the chassis that can be subjected by tugging the bottom of the Fush Nano chassis. The charging you method requires only about 40 a few minutes to finish.

It is stated this new pod method generates a solid flavor with a 7-watt airflow pressure output environment. This means you may use vape directly to receive a remarkable flavor, while also resulting in a great blow in your tonsils. By pressing the 10-watt productivity switch, the product will generate more vapor for a large number of clouds. This switch also changes off of the product after 5 presses.

The pod can retail store approximately 1.5 ml of electronic water, and its internal structure is comparable to the building program. This design and style type helps to ensure that the vapor is made and maintains the original taste. Pod refilling can also be simple and can be carried out through part-fill up ports to reduce leakage of digital liquid for any simple, clean satisfying procedure.

Parameters of Acrohm Fush Nano Pod Kit

Product Size: 19.3 * 102mm
Battery: 550mAh
Capacity: 1.5ml
Resistance: 1.4ohm
Output Power: Airflow Control 7W / Button Switch 10W
Charging: Micro USB port
Charging Current: 1A
Charging Time: 40min
Connector: Magnetic


Acrohm Fush Semi Mech LED Mod will be the initially semi-automatic mod with LED lights that illuminate the entire entire body. With innovative modern technology, it is possible to modify the shade of the LEDs with a single tap. The lamps can be set to environmentally friendly, red-colored and azure pink or white. Long-lasting bulletproof polycarbonate (PC) is used and will hardly crack.

For cosmetic factors, Acrohm Fush Semi is also manufactured from meals-quality 304 stainless steel having a remarkable appearance. Acrohm Fush Semi uses a single 18650 electric battery to make certain substantial-overall performance avoid productivity. You will find six vents within the launcher to avoid the battery from overheating.

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, cover all the top brand! Trusted Vape Wholesale Supply by VapeShops Owners.


Dovpo Topside Dual Squonk Mod Evaluation

Featuring 200 watts of directly power, full temperature management suite, TCR features and much more, the Topside Dual is about as innovative as squonk mods get in 2019. As mentioned previously, the mod includes a laser beam-precise YiHi chipset which might not be AS attribute-packed as the DNA Shade potato chips available, but it’s a close race. And for me, the YiHi actually noses ahead as a result of no-nonsense operations that by no means get bogged down in uncomfortable menu trees and shrubs or confusing enter sequences.

When I picked a series of RDAs to use for tests, I was floored by how easily the Topside Dual reached function. There is very little priming or prep needed. Just appreciate, wick and fill up, as it ought to be. Whichever BF atomizer I was utilizing, liquid stream was smooth and stable – no random gushes or overfills in this article. If anything, the slightly rigid jar aided ensure intense squeezers don’t flood their decks by accident.

Speaking of “feel” – the 3 button set-up is just about flawless. The fireplace crucial and both operation control keys have a sound, reassuring click on that registers with each press. Some might find the mild noise frustrating, nevertheless, it only instilled much more confidence in how well the Topside Dual is made.

Utilizing Dual 18650 tissues, the mod provides Correct 200-watt production. Despite the fact that battery lifespan struggles a little at greater wattages, the Topside Dual never ever stutters while ascending the ladder. Apart from, no one is investing in a Dual-18650 squonk anticipating stellar life of the battery, but in most cases the Dual hangs inside with similar devices, supplying roughly 4-5 several hours of overall performance with modest use. Unfortunately, the USB charging is far too slow-moving to use effectively as needed, so have spares handy.

Ultimately, I’ve seen some reviews, both for the Dual Carbon and original Topside Dual, exactly where authors lamented bad temp manage overall performance. I did not practical experience anything at all wonky or unusual here. While it wasn’t QUITE perfect, the YiHi chipset enabled for an array of customizations, and once locked in, never ever really jumped or stuttered.

As far as we’re concerned, if you’re a TC vaper trying to find a higher-temp, high-strength squonk mod, you can purchase with confidence.


Brand: Dovpo

Size: 54*42*88.5mm

Material: Aluminum Alloy, Carbon Fiber, Zinc Alloy, and Stainless Steel

Battery: 2 x 18650 High-Drain Batteries

Chip: YiHi Chip

Power Range: 5.0W-200W

Temperature: 100-300℃/212-527℃

Joule Range: 10.0J-120.0J

Display: 0.96″ TFT Color Screen

Input Voltage: 6.4V-8.4V

Output Voltage: 0.8V-8.0V

Resistance: 0.1ohm-3.5ohm

Charging: MicroUSB 5V/2A

Gole-plated spring-loaded 510 pin

Silicone bottles with a capacity of 10ml

Vape Wholesale & buy Electronic Cigarettes online in Bulk. Quality Vape Products, cover all the top brand! Trusted Vape Wholesale Supply by VapeShops Owners.